Advertisement
ABOUT TH IS BOOK
This book gives a 3741 operator procedures for doing normal
key entry operations. It is intended for people who are, or
will be doing key entry jobs.
You should use the operator's guide as a reference to find out
what the necessary steps are to perform a job. There is a table
of contents at the beginning of each section to help you find
the procedure tor the particular job you want to do.
You should have typing experience and have taken either the
IBM Data Processing self-study course or the IBM Field
Engineering key entry course before using this book.
For additional information about the 3741, see the following:
• IBM 3740 Data Entry System, System Summary and
Installation Manual-Physical Planning,
GA21-9152.
• IBM 3740 BTAMITCAM Programmers Guide,
GC21-5071.
• IBM 3741 Data Station Reference Manual,
GA21-9183.
•
The IBM Diskette General Information Manual,
GA21-9182
• IBM 3741/3742 Reference Card,
GX21-9172.
• IBM 3740Job Instruction Form,
GX21-9186.
• IBM 3740 Printer Chart,
GX21-9187.
• IBM 3740 Run Sheet,
GX21-9185.
• IBM 3741Models3 and 4 Programmable Work Station
Programming Reference Manual,
GA21-9194.
• IBM 3747 Data Converter Reference Manual,
GA21-9170.
Advertisement
