Advertisement
How to Replace a Ribbon Cassette (continued)
Left Guide
Right Guide
;~
Print Belt P u l l e y - w
1111
Ribbon Drive Release Lever
One Turn Twist
Cassette
132
10.
Using the ribbon feed diagram as a guide, start from the
left end of the cassette and thread the ribbon through
the ribbon drive release lever and around the left guide.
11.
Close the ribbon drive release lever.
12.
Pull approximately 12 inches (305 mm) of ribbon out
the right end of the cassette.
13.
Thread the ribbon from the left guide, around the right
guide.
14.
Turn the print belt pulley counterclockwise to take
up any extra ribbon slack.
Note:
When the ribbon is tight, there should
be
a one-
turn twist between the cassette and the right guide.
Advertisement
