Advertisement
Code
Type
Mode
Causes
What You Do
K
Keying
ALL
•
Pressed NUM SHIFT and A or Z.
Reset and press the correct key.
ALL
• The PROG NUM SHIFT switch is
Reset and press the correct key or set
set to NUMBERS ONLY, the 3741
PROG NUM SHI FT to all characters.
is in a programmed numeric field
and the character keyed isn't 0, 1,
2, 3, 4, 5, 6, 7, 8, 9, dash, space,
or plus.
ALL
•
One of the two keys pressed follow-
Reset and press HEX and the two hex
ing the hex isn't a hex character.
characters.
L
Incorrect
v
•
Pressed CHAR ADV or FIELD ADV
Reset and press appropriate key.
Function
in Verify (V) mode.
c
•
Pressed REC BKSP or REC ADV in
Reset and press appropriate key.
Field Correct (C) mode.
S,U, V
•
Pressed DISPLAY PROD STAT when
Reset and reselect appropriate function.
not on track 00 or Enter (E) mode.
C, V
•
Pressed a DISK 2 key when in Verify
Reset and reselect appropriate function.
(V) or Field Correct (C) mode.
237
Advertisement
