Advertisement
Code
Type
Causes
A1
A2
Card read/punch Data recorder is offline.
Card read/punch •
Data recorder hopper is empty.
• Data recorder stacker is full.
• Data recorder transport jammed.
• Data recorder was online with
the 3741 when the 129 Data
Recorder power switch was
turned on.
A3
Card read/punch Read or punch data miscompare.
data error
What You Do
To retry the operation, use the error recovery procedure
for error codes A 1, A2, or A3 in the
Error Recovery
and
Glossary
section of this manual.
Press NUM SH I FT with RESET to bypass the card read/
punch operation.
Press ALPHA SHIFT with RESET to bypass any remain-
ing card read/punch operations.
Press ALPHA SHIFT and NUM SHLFTwith RESET to
terminate the ACL program and return to Index (X) mode.
Note:
EOD is not updated. Follow your local procedures
for a power outage to update the EOD and continue with
the job.
185
Advertisement
