Code
Type
Cause
6x5
1
Disk error
Write error.
6x8
1
Disk error
Write error.
6x9
1
Disk error
Seek error.
7x0
1
Disk drive
Either the drive has come unlatched
while the program was running or
a program error occurred.
1 x=data set number (1 through 4).
What You Do
Same procedure as 6x2.
Same procedure as 6x2.
Same procedure as 6x2.
Press RESET and note the next code. If the drive is open, a 6x0
or 100 error will appear. With a 6x0 code, follow the procedure
outlined under 6x0 in this section. For a 100 code, the ACL
program has terminated and you will have to follow your job
restart procedure to continue the job. If the drive has not been
opened, there is a programming error and you will have to get
programmer assistance.
199