Advertisement
Loading Programs for the Printer
Printer programs are loaded the same way key entry programs
are loaded (see
How to Load a Program).
Note:
Program storage area A is reserved for vertical forms
control, horizontal tab stops, and program selection control.
Because printer program selection can be automatic, you'll
seldom have to select a program. But if you do, simply press
SEL PROG and key in the appropriate storage area number
( 1 through 9).
For formatting instructions, see the
IBM 3741 Data Station
Reference Manual,
GA21-9183.
Print Procedures
The following procedures apply to printing records with or
without format control.
100
How to Print a Single Record
When printing a single record, the 3741 prints the record
currently displayed. Once you have it displayed, simply:
1.
Press FUNCT SEL upper and PRINT REC (starts the
printer).
After printing the record, the 3741 returns to the mode it
was in before printing the record.
How to Get an Unformatted Data Set Printout
1.
2.
3.
Insert the diskette.
Advance (if necessary) to the data set label for the data
set to be printed.
Turn the AUTO REC ADV switch on (for continuous
printing).
Advertisement
