Advertisement
Code
Type
Mode
H
Copy Setup
ALL
x
s
BSCA Setup
COMM
1
COMM
1
COMM
1
Cause
• After pressing COPY:
- The Disk 2 address is less than
track 00, sector 08.
-Disk 2 isn't ready.
-Didn't hold down NUM SHIFT
when pressing COPY.
• Disk 1 is on track 00, but Disk 2
isn't on track 00.
• Pressed SEARCH SEQ CONTENT
in copy setup.
• The keylock is locked or the ter-
minal ID feature is installed and
the cursor is past position 016.
•
Inquiry
(I)
mode was selected and
the current data set record length
is not 128.
• Communications was selected from
the Update (U) mode and the rec-
ord length of the current data set
is not the same as the receive data
and insert constants program.
1
COMM identifies errors that occur during communications; see
Communications.
What You Do
Reset and advance to proper Disk 2
address.
234
Reset and press DISK 2 RET TO INDEX.
Reset, hold down NUM SHIFT and press
COPY.
Reset, press DISK 2 RET TO INDEX,
then position Disk 2 to the correct label.
Reset and select proper function.
Unlock the keylock or key in the proper
ID characters.
Use a data set with a record length of
128.
Correct the receive data and insert con-
stants program. Restart communications.
Advertisement
