Advertisement
Code
Type
Mode
Causes
What You Do
E
End of Extent
E
• Tried to copy from Disk 2 beyond
Reset and continue on another data set
the last record in the data set.
or diskette.
E,U
• Tried to record advance on Disk 1
Reset and modify the EOE in the data
beyond the EOE.
set label.
v
• The disk has returned to the Index
Reset.
track after the last record in the
data set is
verified~
E
•
Encountered EOE on Disk 1 during
Reset and modify the EOE in the data
a copy operation.
set label or continue on another diskette.
F
Function Not
ALL
• The selected function isn't available.
Reset, press FUNCT SEL, and rekey the
Available
appropriate key or keys for the desired
function.
ALL
•
Improper Disk Copy setup.
Prepare disk 2 .
G
Write Protect
x,u
• Tried to select Enter (E) or Verify
Reset and inspect position 43 of the
(V) mode with the data set pro-
data set label.
tected.
u
• Tried to enter on the disk in Update
Reset, press RETURN TO INDEX, and
mode with the data set protected.
inspect position 43 of the data set label.
u
• Pressed REC ADV with the data set
Reset and inspect position 43 of the
protected while at the last record in
data set label.
the data set and in Update (U) mode.
COMM
1
• The first data set label (which is
Insert a new diskette or remove the P
made available for a receive oper-
from position 43 of the data set label.
ation) is write protected.
1
COMM identifies errors that occur during communications; see
communications.
233
Advertisement
