Advertisement
Display Field Name and Display Field Program
These two keys control the last 30 character positions of the
fifth line on the display screen. See Operator Guidance.
DISPLAY FIELD NAME - shows current prompting message.
If the message is longer than 30 characters, the characters be-
yond 30 aren't displayed.
DISPLAY FIELD PROGRAM - shows current program field.
If the field is longer than 30 characters, only the first 30 are
displayed.
10
Display Program
DISPLAY PROG displays the program in the storage area indi·
cated by the program number in the status line. But this does
not allow you to change the program.
To display the program so you can change it, press FUNCT
SEL lower, hold down NUM SH I FT, and press DISPLAY
PROG. After changing the program, you must load and select
it again before using it.
Note: Displaying the program while in program 0 displays data
in the current record.
Advertisement
