Advertisement
5.
6.
Press FUNCT SEL upper.
Hold down NUM SHIFT and press PRINT TO EOD
(starts printer).
Note: If printing using SEARCH CONTENT, the search cri·
teria must be keyed for each new disk.
If the 3741 has a second disk drive (with a 3715 or 3717
Printer attached):
Printing can automatically continue from disk 1 to disk 2.
See the IBM $741 Data Station Reference Manual, GA21-9183,
for information on the data set label requirements.
104
How to Print a Single Record from Disk 2
1.
2.
Load the printer programs if necessary.
Display the record on the second disk that you want to
print.
Note: If you aren't currently doing Disk 2 operations,
you'll have to do a Disk 2 search to display the record.
In this case, see.Searching Disk 2.
3.
Press FUNCT SEL upper and PRINT RECORD (starts
the printer).
After printing the record, the 3741 returns to the mode it was
in before printing the record.
Advertisement
