Table of Contents
Advertisement
ELECTRIC VEHICLE (EV) OVERVIEW
3. Press the Start button on the handlebar multifunc-
tion switch for 0.5 seconds. The ON indicator is
shown on the lower left of the display.
4. Press the Start button for 0.5 seconds again to
activate the high-voltage propulsion system.
5. When the READY indicator is shown in the lower
left of the display, the accelerator lever can then
be used to drive forward.
78
Switching to and from Reverse
When the vehicle is in the READY to drive mode, it
is automatically set to the forward drive position.
To switch to reverse mode, press and hold the Start
button for 0.5 seconds. Repeat the procedure to
return to forward drive mode.
Standby Mode
When the vehicle is in the READY to drive mode, it
will begin moving when the accelerator lever is acti-
vated. While in this mode, if there is no interaction
with the vehicle for one minute, a tone will sound,
and a message will be displayed.
Pressing the brake lever will keep the vehicle in the
READY to drive mode.
If there is still no user interaction, the vehicle will
automatically switch to the ON mode, where move-
ment is not possible.
Advertisement
Table of Contents
