Table of Contents
Advertisement
WARNING
Remove the tether cord cap from the vehicle cut-off
switch before performing any maintenance or
adjustment, unless otherwise specified. The vehicle
must be parked in a safe place, away from the trail.
c. Loosen the rear axle nut.
d. Tighten the adjustment screw on the side
where the slider shoe is the farthest from the
track insert guides.
5. Tighten the rear axle nut.
WARNING
Properly tighten the wheel retaining bolt, otherwise
wheel may come off and cause track to "lock."
6. Restart the vehicle and rotate the track slowly to
recheck the alignment.
LYNX ADVENTURE ELECTRIC
7. Tighten the rear axle nut to the specified torque.
Tightening Torque
Rear axle screw
8. Reposition the snowmobile on the ground.
Suspension
EV
01
Vehicle Deactivation
Classification:
See Vehicle Deactivation Classification for more
information.
48 ± 6 Nm (35 ± 4 lbf-ft)
Mandatory Personal
Protective Equipment
(PPE):
•
Safety Glasses
•
Safety shoes with
electric shock resis-
tant soles
183
Advertisement
Table of Contents
