Table of Contents
Advertisement
SAFETY INFORMATION
Before Starting
1. Remove snow and ice from body including lights,
seat, footrests, controls and instruments.
2. Remove packed snow and ice from the rear sus-
pension using the wrench tool.
3. Verify that skis and steering operate freely. Check
corresponding action of skis versus handlebar.
4. All storage compartments must be properly
latched and they must not contain any heavy or
breakable objects. Hood and side panels must be
properly latched.
5. Activate the accelerator lever several times to
check that it operates easily and smoothly. It must
fully return when released.
6. Activate the brake lever and make sure the brake
fully applies before the brake control lever touches
the handlebar grip. It must fully return when
released.
62
7. Apply parking brake and ensure it operates prop-
erly. Leave parking brake applied.
After Starting
For proper starting procedure, refer to STARTING
THE VEHICLE in STARTING AND DRIVING.
1. Check headlights (high beam and low beam), tail-
light, stop light and pilot lamps operation.
You may need to detach the tether cord from your
clothes to check the lights. In this case, attach the
cord as soon as you return to the controls of the
snowmobile.
2. Check the emergency stop switch operation.
3. Check the power-off switch operation by pulling
the tether cord cap.
4. Release the parking brake.
NOTE:
Advertisement
Table of Contents
