BRP LYNX ADVENTURE ELECTRIC 2024 Operator's Manual page 46

Table of Contents

Advertisement

SAFETY INFORMATION
The vehicle's electric motor is mechanically con-
nected to the snowmobile track and can generate
electricity when rotated.
AVOID PULLING OR PUSHING THE VEHICLE TO
CAUSE THE TRACK TO MOVE WHEREVER POS-
SIBLE. IF NECESSARY, THE VEHICLE MAY BE
TEMPORARILY PULLED AT A SPEED NO
GREATER THAN 10 km/h (6 mph).
The vehicle must be secured in an upright position
whenever it is being lifted or manipulated. Never use
metal or conductive components to lift, manipulate or
secure the vehicle.
44
A flatbed truck or comparable transport vehicle is rec-
ommended to transport the vehicle to prevent the
track from moving. The vehicle shall be secured onto
the platform facing forward using the ski legs, not the
skis, and the rear suspension. A strap can be used
on each of the front ski legs (spindles) or 1 strap can
be passed behind both ski legs (spindles). Pass a
strap through the rear suspension to anchor the track
on the platform. Alternatively, the 2 footrests can be
used at the lifting points.

Advertisement

Table of Contents
loading

Table of Contents