BRP LYNX ADVENTURE ELECTRIC 2024 Operator's Manual page 43

Table of Contents

Advertisement

Vehicle Stop While in Motion
Purpose: Become familiar with using the emergency
stop switch when in motion so you know how the
vehicle will react if you need to use it later.
Directions:
Partway down the straightaway, while operating at
8 km/h (5 mph), toggle the stop switch to the OFF
position and coast to a stop.
Restart the vehicle and repeat the exercise. Try
increasing your speed (to a maximum of 20 km/h
(12 mph) before using the stop switch.
In an emergency, the snowmobile can be stopped by
pressing down on the emergency stop switch or by
pulling the tether cord cap from the cut-off switch,
while applying brake.
LYNX ADVENTURE ELECTRIC
Basic Turns
Purpose: Get comfortable turning in a controlled
manner on both sides.
Directions:
Roll in a straight line at low speed and make a
wide arcing turn. Make sure there is enough space
to perform the entire turn.
Repeat right and left turns and maintain a steady
speed below 8 km/h (5 mph). Hold the accelerator
lever to maintain your low speed.
Leaning forward and into the curve may help you
to turn the handlebar more easily.
41

Advertisement

Table of Contents
loading

Table of Contents