BRP LYNX ADVENTURE ELECTRIC 2024 Operator's Manual page 183

Table of Contents

Advertisement

Aligning the Track
WARNING
Before checking track alignment, ensure that the
track is free of all particles which could be thrown
out while track is rotating. Keep hands, tools, feet
and clothing clear of track. Always lift the
snowmobile on a wide-base stand with a rear
deflector panel. Ensure no one is standing in close
proximity to the snowmobile, especially at the rear
of the track. Never rotate track at high speed.
Centrifugal force could cause debris, damaged or
loose studs, pieces of torn track, or an entire
severed track to be violently thrown backwards out
of the tunnel with tremendous force.
LYNX ADVENTURE ELECTRIC
1. Lift the rear of the vehicle and support it off the
ground.
Use proper lifting techniques, including lifting with
your legs. Do not attempt to lift the rear of vehicle if
it is above your limits.
2. Start the vehicle and accelerate slightly so that
the track slowly turns. This must be done in a
short period of time (15 to 20 seconds).
CAUTION
181

Advertisement

Table of Contents
loading

Table of Contents