BRP LYNX ADVENTURE ELECTRIC 2024 Operator's Manual page 106

Table of Contents

Advertisement

VEHICLE INFORMATION
Headlights Dimmer Button
Press to select HIGH or LOW beam. Lights are auto-
matically ON when the vehicle is ON.
Applet Switcher Button
This button is used to show the various applets in
the display.
Volume Control Button
This button is used to change the volume.
Heated Grips and Accelerator Lever Button
If the voltage of the 12V battery falls below 12 V,
the heated grips will be turned off.
The button controls the handlebar grips and accel-
erator lever heat intensity. The balance between the
temperature of the accelerator lever and the grips
can be adjusted.
104
NOTE:
Press the button or use the up/down button as
required to select the heating intensity to keep your
hands at a comfortable temperature.
Adjusting the Heated Grips Ratio – 10.25" Color Touch-
screen Display
The heated grips ratio can only be adjusted using
the touchscreen. The touchscreen is not available
when riding.
1. Go to the Applet Menu and select the Controls
app.
2. Slide the Heat Ratio cursor to adjust the heated
grips balance.
NOTE:

Advertisement

Table of Contents
loading

Table of Contents