Hazardous Materials - BRP LYNX ADVENTURE ELECTRIC 2024 Operator's Manual

Table of Contents

Advertisement

The lithium-ion high-voltage propulsion battery or
high-voltage components can cause electrical
shock and/or fire when damaged. Do not
disconnect or touch any exposed connections
and/or damaged components with bare fingers,
non-insulated tools or other metallic objects.
Contact with high-voltage current will cause serious
injury or death.
A damaged lithium-ion high-voltage battery can leak
electrolyte and/or generate flammable gas. Contact
with electrolyte will cause serious injury, rinse the
affected area with water and seek for immediate
medical attention.
The vehicle high-voltage system must be disabled
using the First Responder Cut Loop (FRCL) located
under the left side body panel. The FRCL usage is
reserved to the emergency personnel or first
DANGER
LYNX ADVENTURE ELECTRIC
responder only. The electric snowmobile should only
be lifted or manipulated by personnel properly
trained, equipped and advised that the vehicle pres-
ents high-voltage hazards.
Additional information can be found in the vehicle's
Emergency Response Guide available at this
address:
https://operatorsguides.brp.com/

Hazardous Materials

Lithium-ion high-voltage propulsion batteries are con-
sidered hazardous materials. Special care are
required for BRP electric snowmobiles or high-
voltage propulsion batteries disposal. Refer to local
regulations regarding shipping or recycling require-
ment for hazardous materials. Contact an authorized
BRP dealer for additional information.
17

Advertisement

Table of Contents
loading

Table of Contents