The
icon is displayed in the cluster when the vehicle is too hot or cold, the high-voltage propulsion
battery has a low state of charge, or there is an error with any of the propulsion system components.
1. High-voltage propulsion system warm-up in progress.
Drive vehicle at low speeds for a few minutes.
Plug in the vehicle.
2. High-voltage propulsion system is in limited performance mode.
Check coolant level. Refer to Maintenance Procedures.
Check heat exchangers cleanliness. Clean if necessary.
Check the coolant pump is activated under normal and charging operation.
3. High-voltage battery state of charge is too low.
Connect the vehicle to an EVSE.
4. Incorrect track adjustment.
Refer to Maintenance and/or an BRP snowmobile dealer for proper alignment and tension adjustments.
VEHICLE LACKS ACCELERATION OR POWER
LYNX ADVENTURE ELECTRIC
229