Table of Contents
Advertisement
TROUBLESHOOTING
1. High-voltage battery state of charge is too low.
Connect the vehicle to an EVSE.
1. Emergency stop switch in OFF position or tether cord cap not installed on vehicle cut-off switch.
Place the emergency stop switch in the ON position and install the tether cord cap (on cut-off switch).
2. Vehicle temperature and/or system voltage is too low.
Connect the vehicle to an Electrical Vehicle Supply Equipment (EVSE) and let the vehicle charging
system recharge the High and Low voltage battery packs.
Contact an authorized BRP snowmobile dealer.
230
HEATED GRIPS/THUMB WARMERS ARE NOT WORKING
VEHICLE HAS SHUT DOWN
Advertisement
Table of Contents
