Table of Contents
Advertisement
VEHICLE INFORMATION
Typical - proper adjustment
•
A = Suspension fully extended
•
B = Suspension has collapsed with operator, pas-
senger and load added
•
C = Distance between dimension "A" and "B", see
table below
152
C
50 to 75 mm (2 to 3 in)
More than
75 mm (3 in)
Less than
50 mm (2 in)
NOTICE
If the specification is unattainable with the original
springs, see an authorized Lynx dealer for other
available springs.
To increase spring preload using tool, always turn the
left side adjustment cam in a clockwise direction, and
the right side cam in a counterclockwise direction.
Never set preload cams directly from position 5 to
1 or directly from position 1 to 5.
What to do
No adjustment required
Adjusted too soft.
Increase preload
Adjusted too firm.
Decrease preload
CAUTION
Advertisement
Table of Contents
