Snowmobiles Equipped with Traction Enhancing Products
If your snowmobile is equipped with a BRP approved
studded track, PROCEED WITH A VISUAL INSPEC-
TION OF YOUR TRACK BEFORE EACH USE.
Look for any defects, such as:
•
Perforations in the track
•
Tears in the track (particularly around traction
holes on studded tracks)
•
Lugs that are broken or torn off, exposing portions
of rods
•
Delamination of the rubber
•
Broken rods
•
Broken studs (studded tracks)
•
Bent studs (studded tracks)
•
Missing studs
•
Studs that are torn off the track
•
Missing track guide(s)
•
Ensure that stud nuts are tightened to the recom-
mended torque
LYNX ADVENTURE ELECTRIC
On approved studded tracks, replace broken or dam-
aged studs immediately. If your track shows signs of
deterioration, it must be replaced immediately. When
in doubt, ask your dealer.
WARNING
Riding with a damaged track or studs could lead to
a loss of control.
Track Tension and Alignment
NOTICE
Track tension and alignment are interrelated. Do
not adjust one without the other.
175