User's Manual
Auxiliary System Function
In the auxiliary system menu, the user can set the system parameters of the multimeter.
Press the
system function, as shown in Figure 2-36.
Table 0-14 Auxiliary System Function
Menu
Interface
configuration
System Setting
Firmware
Factory Setting
Instruments.uni-trend.com
key, and then press the
Figure 0–41 Auxiliary System Function Menu
Description
Set the instrument's interface parameter, which is
Ethernet setting, serial port setting
Language, beeper, display setting, time and date,
About
The instrument can be updated by reading inserted
USB
Reset the instrument to the factory settings
key to enter the operation menu of the auxiliary
UT8806E Desktop Digital Multimeter
47 / 104