Table of Contents
Advertisement
User's Manual
4. Short-circuit connect the two test leads and the screen displays the lead impedance, as
shown in Figure 4-3.
5.
Set the parameter for relative operation.
Press
relative operation.
6. The user can directly open the relative operation on measurement interface and get the
lead impedance after the relative operation.
Example 3 dBm Measurement
The dBm operation is commonly used in audio signal measurement. The following describes
how to realize dBm measurement.
Operation Steps
Instruments.uni-trend.com
Figure 0–72 Reading of Test Wire Short-circuit
→ [Relative Value] and use the arrow keys to set the parameter for the
Figure 0–73 Resistance Reading after Relative Operation
UT8806E Desktop Digital Multimeter
84 / 104
Advertisement
Table of Contents
