Table of Contents
Advertisement
User's Manual
Sampling Setting
Sampling is the process of taking signals at regular intervals and digitizing them. The trigger
modes available for this multimeter include auto trigger, single trigger, and external trigger.
Press the
Table 0-20 Sampling Function
Function Menu
Trigger Source
Delay
Sampling count
Slope
VMC Output
Instruments.uni-trend.com
key to enter the sampling setting menu, as shown in Figure 2-46.
Figure 0–51 Sampling Setting Menu
Set Value
Auto trigger, single
trigger, and external
trigger
Auto/Manual
Positive/negative
Positive/negative
UT8806E Desktop Digital Multimeter
Description
Set the trigger source for
sampling
Set the delay
Set the sampling count for
sampling
Set the polarity for the external
trigger slope
Set the polarity of the pulse
signal output to the external at
the end of sampling
58 / 104
Advertisement
Table of Contents
