User's Manual
UT8806E Desktop Digital Multimeter
Enable Trigger
The UT8806E has two kind of trigger mode, automatic trigger and single trigger, it can be
enabled by pressing the
or
keys on the front panel. The default mode is
automatic trigger when the multimeter has powered on.
Automatic trigger
Press the
key one time on the front panel to enable the automatic trigger, then it can
acquire continuous reading. "Auto Trigger" will display at the black area on right top of the
screen. Press it again to disable the trigger.
Single Trigger
Press the
key on the front panel to generate a single trigger. "Single Trigger" will display
at the black area on right top of the screen.
Help System
The UT8806E multimeter provides a powerful help system, which can be called up at any time.
The built-in help system provides help for any of the front panel keys and Menu soft keys. The
user can also utilize the help list to get help information for some common operations.
Press the
key and press the
key to enter the built-in help system, as shown in
Figure 2-49.
Figure 0–54 Help System Menu
Instruments.uni-trend.com
62 / 104