System Requirements For Installing The Ut70D Interface Program - UNI-T UT70D Operating Manual

RS232C Serial Port(2)
C System Requirements for Installing the UT70D
Interface Program
To use UT70D Interface Program, you need the following
hardware and software:
An IBM PC or equivalent computer with 80586 or
higher processor and 640 x 480 pixel or better
monitor.
Microsoft Windows 95 or above.
At least 16MB of RAM.
At least 8MB free space in hard drive.
Can access to a local or a network CD-ROM.
A free serial port.
A mouse or other pointing device supported by
Windows.
Please refer to the included "Installation Guide &
Computer Interface Software" for installing and
operating instructions of the UT70DInterface Program.
This operating manual is subject to change without notice.
** END **
47