Table of Contents
Advertisement
User's Manual
AC
voltage measurement or AC current measurement (secondary function)
2-wire impedance measurement or 4-wire impedance measurement (secondary function)
Capacitance measurement or match with probe temperature measurement (secondary
function)
Continuity measurement or diode measurement (secondary function)
Signal frequency measurement or signal period measurement (secondary function)
Dual display function or auxiliary system function (secondary function)
Sampling setting or auxiliary help system (secondary function)
Mathematical operation or storage function (secondary function)
Start/stop or return function
Manual trigger or reading hold function
Secondary function or key switching
6：Range and Direction Key
Automatic/manual range
Set the parameter/move the cursor/page turning/range switching
Configure measurement parameter/Select cursor position
7：Signal Input
The signal to be measured is connected to the multimeter via this input terminal. The
measurement connection method varies for different measurement objects, so please
refer to the description in "Measurement Connection" for details.
8：Front/rear Input Switch
Select the input terminal, when the switch key is pressed, the measurement circuit
connects to the input terminal on the rear panel; when the switch key is pop-up, the
measurement circuit connects to the input terminal on the front panel. Be sure to
disconnect the input signal when switching.
Instruments.uni-trend.com
UT8806E Desktop Digital Multimeter
5 / 104
Advertisement
Table of Contents
