I/O Configuration - UNI-T UT8806E User Manual

User's Manual
 Copy
The UT8806E only supports copy the local files to external USB storage devices; press the
[Shift] + [Math] key on the front panel to enter the management file menu, as shown in
Figure 2-40. Select the internal storage device (I:/); press the [Item] key to select the file,
and then press the up and down keys to select the desired file; press the [More] key and
then press the [External] key to copy the file to external storage device or [Copy All] to
copy all files to external storage device.
 Format
The UT8806E only supports format the local storage. Press the [Shift] + [Math] key on the
front panel to enter the management file menu, as shown in Figure 2-40. Select the
internal storage device (I:/); press the [More] key and then press the [Format] key to
perform the formatting function.

I/O Configuration

Press the [Port Setting] key to enter the I/O configuration menu, as shown in Figure 2-41.
LAN Setting
The user can operate the instrument remotely via the LAN interface. You can view and set the
current IP address, subnet mask and gateway in the network settings.
After entering the operation menu of the auxiliary system, press the [Interface Configuration]
key to open the network, select [Ethernet Setting] → [Network On] → [Network Setting] to
enter the interface as shown in Figure 0–42, and change the current settings by using the
arrow keys.
Instruments.uni-trend.com
Figure 0–46 I/O Setting Menu
UT8806E Desktop Digital Multimeter
52 / 104