Table of Contents
Advertisement
User's Manual
Press the [Beeper] key to turn on/off this function. The instrument emits a 2 kHz beep
when the beeper is turned on and the continuity measurement is enabled.
3. Display setting
Adjust the drive current of the display backlight.
4. Time setting
Press the [Time] key to enter the menu, and use the arrow keys to set year, month, day,
hour and minute, and then press [OK] to save and exit the setting. The timing circuit is
powered by the internal battery of the instrument.
5. About
Check the system information, including the instrument's model, software version,
hardware version and serial number, as shown in Figure 2-45.
Instruments.uni-trend.com
Figure 0–50 System Menu
UT8806E Desktop Digital Multimeter
56 / 104
Advertisement
Table of Contents
