Table of Contents
Advertisement
User's Manual
Example 6 Hold Measurement
The Hold measurement feature allows the user to obtain a steady reading that remains on the
front panel display. The reading remains on the screen when the test pencil is removed. The
following section describes how to hold the reading on the screen.
Operation Steps
1. Press the
the appropriate voltage scale.
2. Connect one end of the test lead to the multimeter, the red test lead to the Input-HI
terminal and the black test lead to the Input-LO terminal, as shown in Figure 2-11.
3. Press the
case, the screen records the measured results of DC voltage, as shown in Figure 4-10.
4. Press the
the appropriate voltage scale.
5. Connect one end of the test lead to the multimeter, the red test lead to the Input-HI
terminal and the black test lead to the Input-LO terminal, as shown in Figure 2-15. At this
case, the screen records the measured results of AC voltage, as shown in Figure 4-11.
Instruments.uni-trend.com
key on the front panel to turn on the DC voltage measurement and select
key and press the
Figure 0–79 DCV Hold Measurement Menu
key on the front panel to turn on the AC voltage measurement and select
Figure 0–80 ACV Hold Measurement Menu
key to open the Hold measurement menu. At this
UT8806E Desktop Digital Multimeter
88 / 104
Advertisement
Table of Contents
