User's Manual
Press the [Upper] to set the upper limit for the limits measurement.
4. Turn on the limit test function and turn on the beeper, as shown in figure above. The
measured value is between the set limits, so the limit test status is "Pass".
5. If the lower limit value is changed to 0V, the measured value is not within the set limit
value, so the beeper sounds, the main display is red, the limit test status is "Fail", and the
number of upper limit failures is displayed, as shown in Figure 4-9.
Instruments.uni-trend.com
Figure 0–76 ACV Lower Limit Setting Menu
Figure 0–77 ACV Upper Limit Setting Menu
Figure 0–78 ACV Limits Measurement Menu
UT8806E Desktop Digital Multimeter
87 / 104