Table of Contents
Advertisement
User's Manual
UT8806E Desktop Digital Multimeter
Data Storage
The user can store the configuration file (corresponding to SYS CFGItem), data file
(corresponding to MEAS CSVItem) or image file (corresponding to SHOT BMPItem) in the
internal storage or external USB storage device.
After entering the storage and restore menu, first press the [Location] to select the storage
area, then press the [Item] to select the stored data, then press the [Save], and finally enter
the file name to complete the storage operation, as shown in Figure 2-38.
Figure 0–43 Storage Menu
Read Data
The multimeter can be configured the setting by reading the status file stored in the local or
external USB storage device.
After entering the storage and restore menu, first press the [Location] to select the storage
area, then press the [Item] to select the stored data, then press the up and down keys to
select the file to read, and then press the [Read] to read the selected data, as shown in Figure
2-39.
Figure 0–44 Read Menu
Instruments.uni-trend.com
49 / 104
Advertisement
Table of Contents
