Table of Contents
Advertisement
User's Manual
UT8806E Desktop Digital Multimeter
Operation Tip
Before testing the on-off circuit, please disconnect the circuit power and discharge the high
voltage capacitor to avoid damaging the multimeter.
Temperature Measurement
UT8806E multimeter supports two kind of temperature measurement, thermocouple and
thermal resistance. The connection and measurement of temperature will be described in
detail below.
Test Steps
1. Press the
key on the front panel, and then press
key to enter the temperature
measurement, as shown in Figure 2-34.
Figure 0–39 Temperature Measurement Menu
2. As shown in Figure 2-35, connect the test lead to the sensor.
Note, the thermocouple probe has polarity, do not connect it reversely.
Figure 0–40 Measuring Connection of Temperature Measurement
Instruments.uni-trend.com
45 / 104
Advertisement
Table of Contents
