UNI-T UT8806E User Manual page 78

User's Manual
Lower limit
Beeper
Delete
Return
Low Limit
High Limit
Status
Low Failures
High Failures
1. Method for limit value
Select the [Upper] or [Lower], and use the left and right arrow keys to edit the digit, and
then use the up and down arrow keys to input the numeric value.
2. Unit of limit value
The unit of limit value is set according to the current measurement.
3. Over range prompts
 The main display font changes from black to red when the reading is greater than the
set upper limit.
 The main display font changes from black to red when the reading is smaller than the
set upper limit.
 The beeper will sound an audible alarm when the reading exceeds the upper and lower
limit values (if beeper is turned on).
The range of limits operation
 The specified upper limit should always be greater than the lower limit.
 The upper and lower limit values are stored in volatile memory. The upper and lower limit
values are reset to their default values when the instrument is power on.
Instruments.uni-trend.com
Set the upper limit of the specified range
When the beeper is turned on, it will sound an audible
ON/OFF
alarm if the reading exceeds the set limit
Delete the current state and restart counting
Save all the changes and return to the previous menu
The lower limit of the current setting
The upper limit of the current setting
The state of limits operation (Pass/Fail)
The number of exceed the lower limit
The number of exceed the upper limit
UT8806E Desktop Digital Multimeter
67 / 104