Dual Display Function; Auxiliary System Functions - UNI-T UT8805E Manual

Figure 2-30 Interface of threshold value setting in continuity test
2) Short-circuit resistance modification (threshold value)
Use the left and right direction button to switch to different digit position, and use up and down button to
increase/decrease the value in selected digit position.
 The short-circuit impedance range is 0-2kΩ, and the default short-circuit impedance is 30Ω.

The short-circuit impedance value will be saved in volatile memory and remains after power failed.


2.4.3 Dual Display Function

The dual display function can display primary measurement value and additional measurement value
simultaneously.
Press button to turn on the dual display function. UT8805E supports the following dual display
combination:
ACV
ACI
FREQ
Primary
Period
measurement
Temp (thermocouple)
Temp
resistance)

Both primary and additional measurement will display measurement data separately.

If the primary measurement uses mathematical operations such as statistics, limits, and relativity,
primary measurement will remain the results of mathematical operations after additional
measurement is turned on.

If primary measurement uses dB, dBm and other mathematical operations, it will automatically exit
mathematical operations after additional measurement is turned on.

Additional measurement uses automatic range by default, and its data cannot be saved.

2.5 Auxiliary System Functions

Press button and then press
where users can set relevant system parameters of multimeter.
(thermal
button to enter operation menu of auxiliary system function setting,
Figure 2-31 Interface of auxiliary system function setting
Additional measurement
FREQ
FREQ
Period, ACV
FREQ, ACV
Input voltage, reference temperature
Resistance
28
UT8805E Benchtop Digital Multimeter