Roland V-Mixer VM-3100 Owner's Manual page 84

VM-3100 EZ Routing Set List
10 SWAP D-MON
In addition to the basic settings in Routing Set 09, a monitor
speaker that is equipped with a digital input connector (such
as the optional DS-90) can be connected to the DIGITAL OUT
A connector.
Channel
5 67 8 910 11-12
INPUT 09
INPUT 10
INPUT 11
INPUT 12
BUS OUT D. OUT B
AUX SEND D.OUTA
Ome
rs s a
oe
eae
MASTER
QM :Send MONO
Qs :Send STEREO
C}: Bus
11 4TrDigiMTR
This contains the settings used for recording to a digital four-
track recorder. The DIGITAL OUT A and B connectors are
used as "busses" connected to the inputs of the digital
multitrack recorder.
BUS OUT D.OUTS
AUX SEND D.OUTA
Omir
Os 34
: 5/6
7/8
i cS ER
MASTER
OM :Send MONO
Qs :Send STEREO
(=: Bus
12 8Tr MTR
This contains the settings used for recording to a digital
eight-track recorder. The AUX SEND and BUS OUT jacks
and the DIGITAL OUT A and B connectors are all used as
"busses" that are connected to the inputs of the digital
multitrack recorder.
BUS OUT D. OUT B
AUX SEND D.OUTA
OQ 12
Q 34
56
Q 7a
MONITOR
MASTER
© Mm :Send MONO
Os :Send STEREO
: Bus
13 EXT DigiFX
This selects the settings needed to keep signals in digital
form for effects processing when the VM-3100 is connected to
an effects device featuring digital input capabilities. The
DIGITAL OUT A connector is connected to the digital input
of the external effects device, and the output of the effects
device is connected to either the DIGITAL IN A or B
connector.
robe
To input digital signals front an external effects device, set the
Master Clock to "DIN-A" (DIGITAL IN A) or "DIN-B"
(DIGITAL IN B) (User's Manual; p.52).
BUS OUT D.OUTB
AUX SEND D.OUTA
Onur
Q a4
Os 56
7/8
MONITOR
MASTER
QM :Send MONO
Os :Send STEREO
Q :Bus