Roland V-Mixer VM-3100 Owner's Manual page 48

48
Record the fader movements to the sequencer.
Put the sequencer in record standby for recording the VM-3100's tracks'
status (mix), set another MIDI channel to play back the mix sent to your
sound module, then begin recording to the sequencer.
Adjust the faders along with the music.
When you have finished moving your faders, stop recording with the
sequencer.
Play back the result.
Switch the sequencer to play the track status of the VM-3100 tracks,
then start playback of the sequencer.
Confirm that the recorded volume level adjustments are the same as
those just made with the faders.
MEM
Holding down the [SHIFT]
button and pressing the
{MIDI CH} button
immediately after
beginning to record with
the sequencer causes the
VM-3100's mixer settings to
be output from the MIDI
OUT/THRU connector.