Roland V-Mixer VM-3100 Owner's Manual page 46

After confirming the settings, you' re finished.
Press the [PLAY] and [STOP] buttons on the VM-3100's panel to
confirm that they indeed control these sequencer functions.
Use a computer to control the Auto Fader function.
Now try using your sequencer's Realtime Recording function to
automate the mix.
Auto Mixing is a function that records fade-ins, fade-outs, and other
fader movements in real time, then automatically reproduces them.
Connect the computer and the MIDI sound module.
The computer and the sound module are connected with an internal
MIDI interface.
In addition, you must have commercial sequencer software such as
"CAKEWALK" installed and configured on the computer.
2 Set the VM-3100.
Next, set the VM-3100 so that MIDI messages are sent in real time as the
faders are moved.
Press the [SYSTEM] button, then press the [F1l-F4 ON/OFF] button.
SYSTEM
MasterClk INTERNAL
Phantom OFF
PREP IHIT
PREF
a FF —P_
Cy, (ES
The Function screen is displayed; press the F2 (MIDI) button, then press
the CURSOR button © to select "ControlType"
= |
fl
Next, press the CURSOR button {J , then rotate the [VALUE] dial to
select "C.C."
SyYSTeEM MILI
Contral Tere iia y
~*~ C.C. Tyre MONO
This transmits Control Change messages from the VM-3100 when the
faders are adjusted.
46
MEMD
Auto mixing is a function
to.record the movement of
each fader such as fade-in
and fade-out, and recall
automatically.