Roland V-Mixer VM-3100 Owner's Manual page 104

VM-3100 List of Algoriyhms
19 STEREO FLANGER
This algorithm features a pair of the same flanger circuits as
that in the BOSS line compact flangers connected in parallel
for stereo input. This algorithm is added using the insert
method.
Flanger
—_
Crip
e e ee
FLANGER
This adds a particular metallic-sounding modulation (rise
and fall in pitch) to the source sound.
Model Type [Model]JNORM, Hi-B
This selects the model of simulated flanger.
NORM
(Normal type <BOSS BF-2>)
HI-B
(High-Band type <BOSS HF-2>) This setting raises the
flanger sound one octave above that at the NORM
setting.
Manual [Manu]0 - 100
This sets the center frequency for the effect. This changes the
pitch of the flanger's metallic sound.
Depth [Depth]O - 100
This sets the depth of the flanger's modulating sound.
Rate [Rate]O - 100
This sets the rate of the swelling of the flanger sound.
Resonance [Reso]O - 100
This sets the intensity of the flanger's effect. Take care to
prevent this sound from damaging your ears or your
playback equipment.
LFO Phase [Phase]O - 180 deg
This adjusts left and right phase shift in the oscillator that
produces the wavering effect. This changes the timing of the
rise and fall of the modulation in the left and right channels.
At Odeg (0 degrees), the left and right pitches rise and fall
together. At 180 degrees, they are completely opposite.
Cross FB [X-FB] (Cross Feedback)-100 - +100
This setting takes the input sounds from the right and left
channels and returns them through the opposite channel's
flanger, resulting in an even stronger flanging effect. A
positive setting causes the inputs to be returned in phase; a
negative setting produces outputs with inverted phase.
Setting the Cross Feedback value too high may result in
extreme oscillation. Take care to prevent this sound trom
damaging your ears or your playback equipment.
Cross Mix [X-Mix]-100 - +100
This setting takes the flanging sound from each of the right
and left channels and mixes it with the flanging sound of the
opposite channel.
A positive setting causes the inputs to be returned in phase; a
negative setting produces outputs with inverted phase.
yore
Cross Feedback and Cross Mix are effects that you cannot get even
by actually connecting tivo flangers in parallel. These parameters
have been added in this algorithm are intended for use in stereo, As
a "hidden" technique, set a negative value for the Cross Mix effect
(invert the phases) to gel a stereo flanging effect that features a
particular floating sensation.
20 VINTAGE PHASE
This algorithm features two analog-type phasers arranged in
parallel, making the effect good for use in stereo. The sound
is added to the source sound as it cycles in and out of phase,
creating the distinctive phaser modulation. This algorithm is
used with insert method. With the send/return method, the
effect is further mixed in with the source sound, which may
weaken the effect.
Phaser
Lp,
eof Php
PHASER
This effect features two linked monaural phasers arranged in
parallel.
ShiftMode [Shift] (Phase Shift Mode)
4STAGE, 8STAGE
This sets the number of stages in the phase shift circuit (four
or eight). Setting this to eight stages increases the number of
points with cancelled frequencies, which sharpens the effect.
28