Roland V-Mixer VM-3100 Owner's Manual page 80

VM-3100 Preset Patch List
erapue Equalizer (3 presets)
Patch Name Comment
P86 GE:TotalE1 Lows and highs boosted; "just right" sound
P87 ~~ GE:TotalE2 Narrowed range of low and high cut, consistent overall sound
P88 GE:SpaceEQ Special effect: stereo output from mono input.
Stereo Chorus (1 presets)
No. Patch Name Comment
P89) =CH:SDD/3+4 Roland SDD-320 (button 3+4)
Stereo Flanger (2 presets)
No. Patch Name Comment
P90 —-~FL:HardJet Typically brash short flanger.
P91 ~—s« FL: Hi-Band Two BOSS HF-2s connected in stereo.
Stereo Phase (2 presets)
No. Patch Name Comment
P92. _PH:dstage Vintage four-stage type phaser.
P93. -PH:See-Saw See-Saw phasing between L/R (eight-stage type).
Hum Canceller (2 presets)
No. Patch Name Comment
P94 HC:Quiet60 Cancels 60Hz hum noise.
P95) HC:Quiet50 Cancels 50Hz hum noise.
Center Canceller (1 presets)
No. Patch Name Comment
P96) = VC:VoCancl Vocal canceller (removes sounds in middle of stereo field).
Isolator & Filter (1 presets)
No. Patch Name Comment
P97, s«1S:HitCancl isolator high-range cancel.
P98 —_-IS:Low-Phs Stereo anti-phase effect for low range.
Speaker Modeling (1 presets)
No. Patch Name Comment
P99 SPM:SpFlat Connecting Roland's DS-90 speakers provides optimum frequency characteristics.
org
Speaker Modeling can be used in FX2 only.