Roland V-Mixer VM-3100 Owner's Manual page 53

7. Rotate the [EFFECTS LEVEL] knob to adjust the volume
level of the effect.
a ics ea ear ee
Adding the "Guitar Multi" effects to Channel 4
- Press [EFFECTS 1].
2. Press [PATCH SELECT] one or more times until the "Gtr
MULTI" lamp is lit.
* To select patches with the dial: rotate the VALUE dial to
change to the desired patch number, then press [ENTER/YES].
3. Press [F1-F4 ON/OFF]. The functions appear in the display.
4. Press [F2] (LOC).
5. Press [ 1 } to select "Location."
6. Rotate the VALUE dial to select "INS CH4."
7. Rotate the [EFFECTS LEVEL] knob to adjust the volume
level of the effect .
ARE NT I NTE BEE DSN SIS TT
Making adjustments while viewing the values
(VM-3100Pro only)
1. Press [EFFECTS 1] or [EFFECTS 2].
2. Press [F1-F4 ON/OFF]. The functions appear in the display.
3. Press [F3] (VALUE).
4. Press[T],[1],[ -], or [ > ] to select the effects module or
parameter you wanto to adjust.
5. Rotate the VALUE dial to turn the effects module on or off,
or to adjust the parameter value.
* The VM-3100Pro features a "Module" screen in which effect
modules can be turned on and off and a "Parameter" screen in
which parameters can be adjusted.
ET eT I I ET ATES OTT,
Saving adjusted effect patches (VM-3100Pro
only)
1. Press [EFFECTS 1] or [EFFECTS 2].
2. Press [F1-F4 ON/OFF]. The functions appear in the display.
3. Press [F4] (SAVE).
4. Press { T } to select "Patch."
5. Rotate the VALUE dial to select the position where you
want to save your patch.
6. Press [1] to select "Name."
7. Use the [ —] and [ — ] buttons and the VALUE dial to
Name the patch.
walt
* By pressing [F1] (Ins), you can insert one character at the
cursor position; press [F2] (Del) to delete one character at the
cursor position,
8. Press [ENTER/YES] two times. Alternatively, you can press
[F4] (EXEC) followed by [ENTER/YES].
m COMPRESSOR
Selecting COMPRESSOR 1 or COMPRESSOR 2
<With the VM-3100>
To select COMPRESSOR 1:
Press [COMP 1/2].
COMPRESSOR 1 is turned on or off simultaneously.
To select COMPRESSOR 2:
Hold down [SHIFT] and press [COMP 1/2].
COMPRESSOR 2 is turned on or off simultaneously.
<With the VM-3100Pro>
To select COMPRESSOR 1:
Hold down [SHIFT] and press [EFFECTS 1] (COMP 1).
COMPRESSOR 1 is turned on or off simultaneously.
To select COMPRESSOR 2:
Hold down [SHIFT] and press [EFFECTS 2] (COMP 2).
COMPRESSOR 2 is turned on or off simultaneously.
SS ETE EET
Selecting the channel to which compression is
to be added
1. Press [COMP 1/2], or hold down [SHIFT] and press
[COMP1/2].
2. Rotate the VALUE dial to select the number of the channel
to which compression is to be added.
RE IEEE IS BLN BIL EIEN LTE EN NS TOE
Using the two compressors as a "stereo pair"
1. Press [COMP 1/2], or hold down [SHIFT] and press
[COMP1/2].
2. Press [F1-F4 ON/OFF]. The functions appear in the display.
3. Press [F2] (LINK).
4. Press [ENTER/YES]. The compressors function as a "stereo
pair."
* When functioning as a stereo pair, settings made to
COMPRESSOR 1 are also aplied to COMPRESSOR 2, and
the compression is added to two adjacent channels.
RE ERE EN II IE INE ES
Separating compressors that have been
linked as a "stereo pair" and using them as
two independent compressors
I. Press [COMP 1/2], or hold down [SHIFT] and press
[COMP1/2].
2. Press [Fl-F4 ON/OFF}. The functions appear in the display.
3. Press [F2] (UnLINK).
4. Press [ENTER/YES]. The compressors function as two
independent compressors.
RECN OG
Adjusting the compressors while viewing the
values
1. Press [COMP 1/2], or hold down [SHIFT] and press
[COMP1/2].
2. Press [F1-F4 ON/OFF]. The functions appear in the display.
3. Press [F3] (KNOB). :
ERR SEE 2s RP EE
Saving compressor settings
1. Press [COMP 1/2], or hold down [SHIFT] and press
{COMP1/2].
2. Press [F1-F4 ON/OFF] two times. The functions appear in
the display.
3. Press [F2] (SAVE).
4. Press { T ] to select "No.."
5. Rotate the VALUE dial to select the number position in the
Library where you want to save these settings.
6. Press { 1} to select "Name."
7. Use the [ — J] and [ - } buttons and the VALUE dial to name
the custom setting.
* By pressing [F1] (Ins), you can insert one character at the
cursor position; press [F2] (Del) to delete one character at the
cursor position.
8. Press [ENTER/YES] two times. Alternatively, you can press
[F4] (EXEC) followed by [ENTER/YES].
Le eae INLETS NT Sen eT ENE
Selecting various compressor settings
1. Press [COMP 1/2], or hold down [SHIFT] and press
[COMP1/2}].
2. Press [Fi-F4 ON/OFF] two times. The functions appear in
the display.
3. Press [F1] (LOAD).
4. Rotate the VALUE dial to select the Library number you
want to load.
* Press [F1] (>Pre) or [F2] (>User) to go to the beginning Preset
or User numbers.
5. Press [ENTER/YES] two times.
A gE a a ae ET
Deleting Unneeded Compressor Settings
1. Select the Compressor screen.
2. Press [F1-F4 ON/OFF] two times. The functions appear in
the display.
3. Press [F4] (DEL).
4. Rotate the VALUE dial to select the Library number to be
deleted.
5. Press [ENTER/YES] two times.
53
USING THE UNIT SAFELY.
IMPORTANT. NOTES :
~ Whatis the VM-3100 Series
¥-Mixing Station?
Part Names
A 3
Trying Out the VM-3108
Digital Mixer Workbook
a
Qo
e
s
a
oa