Related Manuals for Roland HandSonic HPD-20
Summary of Contents for Roland HandSonic HPD-20
- Page 1 MIDI Implementation Copyright © 2013 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
-
Page 2: Midi Implementation
MIDI Implementation ❍ Foot Controller (Controller Number 4) Model: HandSonic HPD-20 ■ Status 2nd byte 3rd byte Date: AUG. 01, 2013 Version: 1.00 n = MIDI channel number: 0H–FH (ch.1–ch.16) 1. Receive Data vv = control value 00H–7FH (0–127: Open–Close) * This adjusts the hi-hat control pedal position. - Page 3 MIDI Implementation ❍ General Purpose Controller 4 (Controller Number 19) ❍ Sound Controller 4 (Controller Number 73) ■ ■ Status 2nd byte 3rd byte Status 2nd byte 3rd byte n = MIDI channel number: 0H–FH (ch.1–ch.16) n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = control value 00H–7FH (0–63: OFF, 64–127: ON)
- Page 4 MIDI Implementation ❍ Sound Controller 8 (Controller Number 77) ❍ General Purpose Controller 7 (Controller Number 82) ■ ■ Status 2nd byte 3rd byte Status 2nd byte 3rd byte n = MIDI channel number: 0H–FH (ch.1–ch.16) n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = control value 00H–7FH (0–127)
- Page 5 MIDI Implementation ■ ■ Channel Mode Messages ●MONO (Controller Number 126) ■ Status 2nd byte 3rd byte * Following Channel Voice Messages can be received in MIDI Channel (MENU --> SYS --> MIDI --> MIDI). ●All Sound Off (Controller Number 120) ■...
-
Page 6: Data Transmission
Exclusive message this is. * When the pad or D-BEAM TriggerMode (MENU --> INST --> SETUP) is set to “GATE, ” Roland’s manufacturer ID is 41H. note off is transmitted after the interval specified in GateTime (MENU --> KIT -->... - Page 7 MIDI Implementation ●Control Change ❍ General Purpose Controller 2 (Controller Number 17) ■ ■ Status 2nd byte 3rd byte * Not transmitted when Control Change Tx (MENU --> SYS --> MIDI --> MIDI) is set to “OFF. ” n = MIDI channel number: 0H–FH (ch.1–ch.16) ❍...
- Page 8 MIDI Implementation ❍ Sound Controller 2 (Controller Number 71) ❍ Sound Controller 6 (Controller Number 75) ■ ■ Status 2nd byte 3rd byte Status 2nd byte 3rd byte n = MIDI channel number: 0H–FH (ch.1–ch.16) n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = control value 00H–7FH (0–127)
- Page 9 MIDI Implementation ●Program Change ❍ Sound Controller 10 (Controller Number 79) ■ ■ Status 2nd byte 3rd byte Status 2nd byte n = MIDI channel number: 0H–FH (ch.1–ch.16) n = MIDI channel number: 0H–FH (ch.1–ch.16) vv = control value 00H–7FH (0–127) pp = program number: 00H–7FH (prog.1–prog.128) * When D-BEAM CC# (MENU -->...
- Page 10 0H–FH (ch.1–ch.16) Byte Explanation Exclusive Status * This is transmitted when the ALL SOUND OFF ( [SHIFT] + [EXIT] ) is used. ID Number (Roland) Device ID (10H fixed) ●Reset All Controller (Controller Number 121) ■ Model ID#1 (V-LINK) Status...
- Page 11 Status 7EH, 00H, 0CH, 01H, 10H, 00H, 00H, 01H, nnH, 10H, 01H, sum Byte Explanation Exclusive Status ID Number (Roland) Device ID (00H fixed) Model ID#1 Model ID#2 10H 00H 00H Address Data (MIDI Visual Control ON) Data (Clip Control Rx MIDI Ch.
-
Page 12: Supplementary Material
16 | 10H || 48 | 30H || 80 | 50H || 112 | 70H | Roland Exclusive messages are transmitted with a checksum at the end (before F7) 17 | 11H || 49 | 31H || 81 | 51H || 113 | 71H |... -
Page 13: Midi Implementation Chart
Digital Hand Percussion MIDI Implementation Chart Date: AUG. 01, 2013 Model: HandSonic HPD-20 Version: 1.00 Function Transmitted Recognized Remarks Default 1–16, OFF 1–16, OFF Basic Memorized Channel Changed 1–16, OFF 1–16, OFF Default Mode 3 Mode 3 Mode Messages Altered...