Roland V-Mixer VM-3100 Owner's Manual page 50

Points for Better Mixin
This section introduces useful procedures for better operation of the VM-3100.
- Words enclosed in square brackets [ ] indicate specified buttons or knobs. Example: { - |, [> L[ T }and [ J ] indicate cursor buttons.
an
- Words enclosed in quotation marks
@ Output
Sending signals from only a specific channel
to the BUS OUT jacks
1. Press the [SELECT] button for the channel whose signals
you want sent to the BUS OUT jacks.
2. Press [BUS ASSIGN].
3. Press [ 1] to select "3/4 BUS."
4. Rotate the VALUE dial to place a check mark.
ELE IEE EE Be aE RE TEES
Sending signals from only a specific channel
to the AUX SEND jacks
1. Press the [SELECT] button for the channel whose signals
you want sent to the AUX SEND jacks.
2. Press [AUX SEND].
3. Press [ - ] one or more times and select "AUX 1" and
"AUX2."
4. Rotate the VALUE dial, or the corresponding knobs [V1]-
[V4], to adjust the send levels of the signals sent to AUX
SEND jaks.
Base RRS eS eRe AA SK Bee Tee SR Sid
Setting the volume level and other settings for
each output jack
1. Press [SELECT] in the MASTER section.
ae
Adjusting the volume and balance of signals
output from the BUS OUT jacks
1. Press [SELECT] in the MASTER section.
2. Press[ Jl] to display the "(OUTPUT) AUX/BUS" screen.
3. Press [ > ] to select "Bout Lev."
4. Rotate the VALUE dial to adjust the volume level.
5. Press [4] to select "Bout Bal."
6. Rotate the VALUE dial to adjust the left/right balance.
LAAT S ERT I I Nee EIDE SER EP
Adjusting the volume of signals output from
the AUX SEND jacks
1. Press [SELECT] in the MASTER section.
2. Press[{ 1] to display the "(OUTPUT) AUX/BUS" screen.
3. Press [> ] to select "AUX 1/2 Lev."
4. Rotate the VALUE dial to adjust the volume level of the
AUX SEND! jack.
5. Press [ — }.
6. Rotate the VALUE dial to adjust the volume level of the
AUX SEND? jack.
EGAN EC ALI tee 2 BO AN EA MSN LE ST AEE,
Adjusting the volume and balance of signals
output from the DIGITAL OUT connectors
T. Press [SELECT] in the MASTER section.
2. Press [ 1] to display the "(OUTPUT) AUX/BUS" screen.
3. Press [ > ] to display the "(OUTPUT) DoutA/B" screen.
4. Press [— | to select "DoutA Lev" or "DoutB Lev."
5. Rotate the VALUE dial to adjust the volume level.
6. Press [J ] to select "DoutA Bal" or "DoutB Bal."
7. Rotate the VALUE dial to adjust the left/right balance.
bse cee ee cae saree Sk a8 ee a Aegean See eR Ka
Adjusting the volume and balance of signals
output from the MASTER OUT jacks
1. Adjust the volume with the MASTER fader.
2. Press [SELECT] in the MASTER section.
3. Press { 1 ] to select "Balance."
4. Rotate the VALUE dial to adjust the left/right balance.
50
indicate parameter names or parameter values in the display.
ROAR UNRNEE ERCCRNERENINNNEEANE G LELIN N TOTO TOMES DION ME ON
Selecting the signal to output from the
MASTER OUT jacks
1. Press [SELECT] in the MASTER section.
2. Press [ T | to select "Source."
3. Rotate the VALUE dial to select the signal to be output.
"MIX (Mix Bus)"
"MON (Monitor Bus)"
ARENA SA RN NT IY EINE IG ENTE GE OT DIE PORN TERRE]
Displaying the internal effects processor send
level and MONITOR output level
Displaying the AUX SEND, BUS OUT, and
DIGITAL OUT A/B output levels
Displaying the RMDB II output levels
(VM-3100Pro only)
1. Press [LEVEL METER].
2. Press [F1] (OUT METER).
3. Press { <— ] or[ > ] to switch to the Level Meter screen of
your choice.
"(FX/MON)" screen — internal effects send level/ MONITOR OUT
"(BUS)" screen — AUX SEND, BUS OUT, DIGITAL OUT A/B
"(TRK)" screen — RMDB I digital output (VM-3100Pro only)
a eT TS ON EE ae LI TOTES
Adjusting the internal effects processor send
level and MONITOR output level
Adjusting the AUX SEND, BUS OUT, and
DIGITAL OUT A/B output levels
Adjusting the RMDB I! output levels
(VM-3100Pro only)
1. Press [LEVEL METER].
2. Press [F1] (OUT FADER).
3. Press [ — ] or [ - ] to change the display to the screen
showing the setting you wish to adjust.
4. Rotate the [V1]-[V4] knobs to adjust the corresponding
levels.
"(FX/MON)" screen — internal effects send level/
MONTTOR OUT
[V1] knob — Effect 1 input level
[V2] knob — Output level
[V3] knob — Effect 2 input level
[V4] knob — Output level
*[V3]-[V4] knob functions are available only on the
VM-3100Pro.
"(BUS)" screen — AUX SEND, BUS OUT, DIGITAL
OUT A/B
[V1] knob — AUX SEND output level (1 and 2 common)
[V2] knob — BUS OUT output level
[V3] knob — DIGITAL OUT A output level
[V4] knob — DIGITAL OUT B Output level
"(TRK)" screen — RMDB Il digital output (VM-3100Pro only)
[V1] knob — RMDB I] DIGITAL OUT 1 and 2 output level
[V2] knob — RMDB I! DIGITAL OUT 3 and 4 output level
[V3] knob — RMDB II DIGITAL OUT 5 and 6 output level
[V4] knob — RMDB I] DIGITAL OUT 7 and 8 output level
(Odd /even channels common)