Roland V-Mixer VM-3100 Owner's Manual page 83

VM-3100 EZ Routing Set List
recorder (shown in the connection diagram on p. 28 of the
User's Manual). The AUX SEND and BUS OUT jacks are
used as "busses," with each output connected to a track
input on the multitrack recorder.
BUS OUT D.OUT 8
AUX SEND D.OUTA
Q wil
Q 34
Q 56
Q 7.
MONITOR
MASTER
Om :Send MONO
Os :Send STEREO
:Bus
06 4Tr D-MONI
Along with the basic Routing Set 05, a monitor speaker that
is equipped with a digital input connector (such as the
optional DS-90) can be connected to the DIGITAL OUT A
connector.
BUS OUT D.OUT B
AUX SEND D.OUTA
Qe
Q 3
QO 56
Q 7
MONITOR
MASTER
@ Mm :Send MONO
Qs :Send STEREO
:Bus
07 MIX DOWN
This contains the settings used when the VM-3100 is
connected to a multitrack recorder for mixdown. All AUX
SEND and BUS OUT jacks are used for sending signals to
external effects. Signals can be sent both two monaural
signals and one stereo signal.
BUS OUT D.OUT B
AUX SEND D.OUTA
Omi
Os 34
Cy 5
QQ 7
MONITOR
MASTER
Om :Send MONO
Os :Send STEREO
Qs: Bus
08 M.D.D-MONI
Along with the basic settings of Routing Set 07, a monitor
speaker that is equipped with a digital input connector (such
as the optional DS-90) can be connected to the DIGITAL OUT
A connector.
BUS OUT D. OUT B
AUX SEND D.OUT A
Omie
pt s -
Bate
MASTER
Om: Send MONO
Qs :Send STEREO
Cl}: Bus
09 SWAP MIX
This sets up the VM-3100 so that, with the outputs of a four-
track recorder connected to Inputs 9-10 and 11-12, Channels
5-8 can be used to balance the mix. When recording to the
multitrack recorder, you can use Channels 9-10 and 11-12 to
monitor two channels at a time, and without changing any
connections, adjust the volume balance independently on
Channels 5-8.
* Channel
5678 9-10 11-12
INPUT 09 eee ea
INPUT 10 —_——__
INPUT 11 ae
INPUT 12 ,
BUS OUT D.OUTB
AUX SEND D.OUTA
Omie _}
Os 34
OQ s6
Q 7a
MONITOR
MASTER
OM : Send MONO
Qs :Send STEREO
: Bus