Roland V-Mixer VM-3100 Owner's Manual page 36

36
Use the same procedure to make adjustments to Keyboards 2 and 3, and
save them to SCENE 2 and SCENE 3 in BANK 1, respectively.
SCENE MEMORY
When using more than one keyboard at the same time, mix and store
them together in a SCENE MEMORY.
Adjust the Master Keyboard.
Next, enable the master keyboard to send MIDI Program Change
messages. For more detailed instructions on making these settings,
please refer to the keyboard owner's manual.
Set the VM-3100 to be changed from the Master Keyboard
Use the following procedure to enable the VM-3100 to receive Program
Change messages from the master keyboard.
Press the [SYSTEM] button, then press the [F1-F4 ON/OFF] button.
So =>
SYOTEM PREF
MasterClk INTERNAL
Phantom OFF
Press the [F2] (MIDI) button to select SYSTEM MIDI.
SYSTEM MITT
LJ Control Tere
see
w~C.C.TyFe
Use the CURSOR ¢ buttons to select "SceneRx. Ch", and set the
channel number to match the MASTER keyboard output channel.
Sy STEM MIDT
wv. * Local
Scenerx.Ch .
w OutyvThru Sel
This completes the necessary settings.
MEM
SCENE MEMORY to which.
no mixer settings have been
recorded cannot be called
up. When selected, these
are skipped.
NEM
The VM-3100 is able to
receive Program Change
messages 1-32. Each
Program Change message
corresponds to one of
SCENES in SCENE
MEMORY, from BANK 1,
SCENE 1 to BANK 8,
SCENE 4.