Roland V-Mixer VM-3100 Owner's Manual page 57

>
'aad
:
2fQ
&
ara
pe)
wt
a
cbt
g
s
4
3
Remote control of MIDI sequencers
- Press [SYSTEM].
2. Press [F1-F4 ON/OFF]. The functions appear in the display.
3. Press [F2] (MIDI).
4. Press [ 1 ] to select "Transport."
5. Rotate the VALUE dial to select "SEQUENCER."
6. Press the transport buttons, such as [PLAY] and [STOP].
This allows you to control starting and stopping of the
sequencer's playback.
* In order for a MIDI sequencer to be controlled from a VM-3100, it
must have a "Remote mode" feature which allows MIDI Start and
Continue messages to be received, yet still played back at the
sequencer's internal tempo. (The VM-3100 does not send MIDI
Timing Clock),
-
What is the VM-3100 Series
Remote control of MMC-compatible recorders
- Press [SYSTEM].
2. Press [F1-F4 ON/OFF]. The functions appear in the display.
3. Press [F2} (MIDI).
4. Press [1 ] to select "Transport."
5. Rotate the VALUE dial to select "RECORDER."
» Press the transport buttons, such as [PLAY] and [STOP].
This allows you to control the playback and stop functions
of the MMC-compatible recorder.
* In order for an MMC-compatible recorder to be controlled from
a VM-3100, it must have a "Remote mode" feature which
allows MIDI Start and Continue messages to be received, yet
still played back at the recorders internal tempo. (The VM-
3100 does not send MIDI Timing Clock).
@ OTHER SYSTEM FUNCTIONS
What is indicated in the display?
nt
o
CH BANK/SCENE PHANTOM EFFECTS MEAS/BEAT
ot 01-1 OFF On 001-01
Edit Target BANK/SCENE Phantom Effects MID} Timing
Channel No. Number Power On/Ot OrvOtt Monitor
* With the VM-3100Pro, EFFECTS ON/OFF indicates the
status for both EFFECTS 1 and 2.
Trying Out the YM-3100
Adjusting the display contrast
1. Hold down [SHIFT] and press [SYSTEM].
2. Rotate the VALUE dial to adjust the contrast of the display.
If you become confused during a procedure
and want to return to the default display
1. Press [LEVEL METER].
Digital Mixer Workhook
To see a larger time code display
1. Hold down [SHIFT] and press [LEVEL METER].
Making foot switch and panel-related settings
1. Press [SYSTEM].
2. Press[1]or| J] to select the parameter to be set.
3. Rotate the VALUE dial to adjust the value.
Switching the function of the SHIFT button
1. Press [SYSTEM].
2. Press| l] to select "ShiftLock."
3. Rotate the VALUE dial to select the mode.
"OFF" -— The shift status is in effect only while the
[SHIFT] button is held down
When the [SHIFT] button is pressed, shift
status remains in effect until the next button
is pressed (executing that action in shift
mode). The shift status is then cancelled.
Once [SHIFT] is pressed, shift status
remains in effect until [SHIFT] is pressed
"ONCE" —
"ON" —
again.
TE IE Ee La aE SEPT OE EELS EE
Using the foot switch as a [SHIFT] button
1. Press [SYSTEM].
2. Press [ 1] to select "FootSw Func."
3. Rotate the VALUE dial to select "SHIFT."
EER NS I EC I RON EELS
Using the Peak Hold function
1. Press [SYSTEM].
2. Press [4] to select "PeakHoldSw."
3. Rotate the VALUE dial to select "ON."
* When set to "ON," display of the peak input level values
remain in the screen. This is useful when setting levels for
nuultiple channels because you can see their highest levels
simultaneously. You can reset the peak value indication by
pressing [LEVEL METER] or [F1-F4 ON/OFF].
TRIO A TTT
Blocking digital copying of your works
1. Press [SYSTEM].
2. Press{ 1] to select "D.CopyProtect."
3. Rotate the VALUE dial to select "ON."
© HON" cesses A "Copy Protect signal" is output with the digital
signals,
"OFF" No "Copy Protect signal" is output with the
digital signals.
. A "Copy Protect signal" is output with digital
signals that are input with the "Copy Protect
signal."
SS UR SE LT EAE TEE
Adjusting the length of time before the
Shortcut screen is displayed
1. Press [SYSTEM].
2. Press [ 1} to select "SwHoldTime."
3. Rotate the VALUE dial to select the time for the screen to be
displayed.
* Shortcut screen examples:
"SOLO MODE" "SOURCE SEL" "D.IN ASSIGN"
ET ae LE TE
Initializing each of the VM-3100's settings
1. Press [SYSTEM].
2. Press {F1-F4 ON/OFF]. The functions appear in the display.
3. Press [F4] (INIT).
4. Press[T],{1],{ <<], or|— | to select the items to be
initialized.
5. Rotate the VALUE dial to place a check mark at the items
being initialized.
* Selecting "ALL" resets the VM-3100's Library and mixer
settings to their original factory values.
6. Press [ENTER/YES] two times.
RS Sa EE PE A EE
Backing up the VM-3100's data
(Before carrying out this procedure, connect a MIDI cable from
the MIDI IN connector of a MIDI sequencer to the VM-3100's
MIDI OUT/THRU connector.)
1. Press [SYSTEM].
2. Press [F1-F4 ON/OFF]. The functions appear in the display.
3. Press {F3] (BULK).
4. Press[T},[1],[<], or[ > ] to select the items to be backed
up.
5. Rotate the VALUE dial to place a check mark at the items
being backed up.
* Selecting "ALL" sends the VM-3100's Library and mixer
settings, in the form of System Exclusive messages, to the
sequencer designated as the backup destination.
6. Begin recording with the MIDI sequencer.
7. Press [ENTER/YES] two times.
8. When the message "Completed." appears in the display,
stop recording with the MIDI sequencer.
IMPORTANT NOTES: ele.
Te iaigemcuclieiita
Part Names
57