Table of Contents
Advertisement
3. Press the
SPEED
CALL
button
when
finished.
Confirmation
tone
wffl
be
heard and the display will update.
To enter
the Intercom
number
or system
speed
dial
bin
to be associated
to the name:
1. Press the TRANS button.
2. Then
enter
either
a three-digit
station
intercom
number
(100-1951
Eial
a three-digit
System
speed
dial
number
(020-099).
3. Press the SPEED CALL button
to save
the
entry.
Confirmation
tone
will be
heard and the display will update.
To clear an entry.
press the FLASH button
followed
by pressing
the SPEED
button.
Confirmatton
tone will be heard and the entry
will be erased.
400.103
ExE(=uTIvE
OVERRIDE
Allows
stations
designated
as "Executive"
the ability to override
and 'barge In" on other
keysets
engaged
in conversation.
If you call a busy station:
a Dial
[294]
on the dial pad.
Executive
station
will be bridged
onto the CO con-
versation
in progress
at the called sta-
tion. Optional
warning
tone is heard and
presented
to all parties
prior
to cut-
-ugh-
b. Replace
handset
at Executive
station
to
terminate
the override.
NOl7Z:Ifthe
busypcuiytswnn&eduiatnter-
wm to another
party,
the intercom wnneciion
will be dropped
when the overtide
occurs.
NCYE:Adecmzseinvohmemayowuronthe
CO line after the
barge-in
oarurs.
400-24
Issue
1.
January
1992
CAUTION:
USE OF THIS FEATURE WHEN THE
EXECUTIVE
OVERRIDE
WARNING TONE IS
DISABLED
MAY BE INTERPRETED
AS A
VIOLATION
OF FEDERAL OR STATE LAWS,
AND AN INVASION OF PRIVACY.
CONSULT
COUNSEL WlTH RESPECT TO APPLICABLE
LAW BEFORE INTRUDING ON CALLS USING
THIS FEATURE.
KlO.104
INTERCOM
CALLING
4
Placing
an Intercom
Call
a Press station
key of party to be called (if
programmed
at your phone);
Kal station
number
(100 to 195).
b. You will hear ringing
if called station
is
in the T
answering
mode:
or three
bursts
of tone if called
station
is in the
'H' or 'P" position.
C.
Lift handset
or use speaker-phone,
tone
bursts
stop.
d. Hang up to end call.
Answering
an Intercom
Ca.U
With your
intercom
signal
switch
in the T
mode, you will hear repeated
bursts
of inter-
com tone ringing
and the HOLD
button
will
slow f-lash.
a Lift handset
or press ON/OFF
button
to
answer. If you receive a call from a Phone
Box. you must press that DSS button
to
answer the call.
b. Hang up to end call.
In the P mode, you will hear three bursts
of tone and one-way
announcement.
The
HOLD button
will slow flash and the call-
ing party cannot
hear conversations
in pro-
gr--
In the H mode, you will hear three bursts
of tone and an announcement.
Reply
hand&e
or lift handset
for privacy.
400.105 INCOMXNGCOUNESOFF-NET
(via speed dialj
Allows the first attendant
station
to forward
incoming
CO calls to an off-net
location.
In a speed dial bin, store the number
of the
off-net
location
where
calls are to be for-
warded.
Follow
instrucUons
provided
for
storing
station
or system
speed
dial num-
bers.
a Dial 12961 on the dial pad:
or
Press pre-progrred
CO Off-Net
For-
ward button.
b. Dial the CO group
access code of the
group to be forwarded.
81
=CO Group
1
82
=CO Group
2
83
=CO Group
3
84
=CO Group
4
85
=CO Group
5
86
=CO Group
6
a7
=CO Group
7
88
=All CO Lines
c. Dial the speed bin number
that contains
the number
where
calls are to be for-
warded:
or
Press the programmed
button
for the
speed bin. Conflrmatton
tone is heard.
Advertisement
Table of Contents
