Table of Contents
Advertisement
FEXTURE OPERATION
Ing?.nite 4096 Hybrid Key Telephone
System
400.92
SPSTEM SPEED DIAL
a ufthandset.
b. Dial I#91 on the dial pad.
c. Dial desired
system
speed bin number
(20-99).
400.93
UNWERSS NIGHI' ANSWER
Upon
hearing
an incoming
signal:
a Lift handset
b. Dial UNA access code 1751. You will be
connected
to ringing
outside
line.
a.94
UCD AVAILABrp;/UNAVAILABLE
If you are a UCD Agent. you may
place your
station
in the Available
mode to receive UCD
type of calls or you may place your station
in
the Unavailable
mode to block UCD type of
calls from ringing
at your station.
To
go Available:
a. Dial 18981 on the dial pad. You may now
receive calls.
To go Unavailable:
a. Dial I8981 on the dial pad.
You are now
blocked
from receiving
UCD calls.
400.96
ANSWERING AN OVrSIDE C%LL
a Lift handset.
b. Press slow flashing
outside
line button.
If your
tfziephme
ts progmmme
d with Re-
ferred
Line Answer,
you may onswerarlout-
sidelinebyl@ingthehandset
400.96
PLACING OUTSIDE LINE ON
HOLD
If your system
is programmed
for Exclusive
Hold Preference.
press HOLD button
once
for Exclusive
Hold and twice for System
Hold.
I
If your system
is programmed
for System
Hold Preference,
press HOLD button
once
for System
Hold and twice for Exclusive
Hold.
400.97
ANSWERING
A-G
OUT-
SIDE LXNE
When
an outside
line has remained
on hold
for an extended
period
of time.
you will be
reminded
with a recalling
ring.
a Press outside
line button
flashing
at very
fast rate.
b. Lift handset
to converse.
400.98
ATTENDANT ACTIVATION OF
BGM
AT
A PHONE BOX
The Attendant
may
control
(turn
ON and
OFF) background
music at a phone
box sta-
tion.
To control
background
music
at a specific
phone
bax:
a.
b.
Dial I2891 on the dial pad.
Then dial the three-digit
station
number
of the desired phone
box.
Then dial either:
l
[O] to turn
BGM off
or
l
111 to turn BGM on
400.99
ATTENDANT DISABLE OUI'GO-
MC ACCESS
The attendant
station
can disable
CO lines,
preventing
outgoIng
CO calls.
a
b.
C.
d.
Lift handset
or press ON/OFF
button.
Dial (2981 on the dial pad. Confirmation
tone is hear
Depress
the line button(s)
of the CO
Line(s) to be disable
ConfIxmation
tone
is heard
and the CO Line Button(s)
LED
ls flashing.
To re-activate
the CO Line(s). repeat the
steps followed
to disable
it.
400.100 -ANT
0-E
IfAttendant
Ovenlde
is allowed, Attendant(s)
stations
may override
or call stations that are
either busy or in Do Not Disturb.
If the Attendant
calls
a statton that is busy
on a CO call and
wishes
to alert them
of a
waitmgcall:
a. Press the pre-programmed
A'lTN OVER-
RIDE button.
Three
short
tone bursts
will be presented
to the called party.
b. After five (5) seconds,
the station's
CO
line will automatically
be placed on hold
and the Attendant
will be cut-through.
If the Attendant
calls a station
that is in Do
Not Disturb
mode and wishes
to alert them
0faca.Q
a Press the pre-programmed
AlllV
OVER-
RIDE button.
The station
will be sig-
naIled with a Camp-on
tone.
4QO.101 ATTENDANT RECALL
When an outside
line has remained
on hold
for an extended
period
of time,
you will be
reminded
with a recalling
ring.
400-22
Issue 1, January 1992
Advertisement
Table of Contents
