Vodavi Infinite 4096 Installation And Maintenance Manual page 71

Imite 4096 Hybrid Key Telephone System
FEATURE OPERATION
ties on hold. Hold timer starts. If one of
the two parties is internal. that party will
be dropped.
c. Press CON'F and hang up or press the
ON/OFF button to leave the other con-
ference parties still connected in an un-
supervised conference. CONF button
will flash and timer will start. There will
be a warning tone before the other par-
ties are dropped.
&-entering a Conference
When the controller re-enters the conference,
the disconnect timer is reset.
a Lift handset to re-enter a monitored con-
ference.
b. To re-enter a conference placed on hold,
repeat steps for establishing a confer-
ence.
c. To re-enter an unsupervised conference,
lift handset and press flash&g CONF
button. The CONF button lights steady
and confirmation tone will be heard.
Terminating a Conference
To texminate a conference:
a Replace handset or push ON/OFF but-
ton to OFF.
To terminate an unsupervised conference:
a Press the flashing CONF button while on
hook. all parties will be dropped.
The conference initiator who is actively in the
conference.
400.24 DIRECTED
CALL PICX-UP
When incoming, transferred, or recalling
outside line &@ng. intercom ringing, or
Camp On ringing is heard at an unattended
telephone:
a Dial the station number of the known
ringing telephone.Receive rlngback
tone, or call announce tone.
b. Press the PICK UP button to answer the
call.
400.25
DIRECT INWARD SYSTEM
AC
mss @ISA)
a Call the phone number or the system
administrator specified of the DISA line.
b. The system answers and returns fnter-
corn dial tone.
c. Enter the DISA access code also speci-
fkcl by the system administrator, if ap-
placable.
d. Dial tone is returned.
To place an outgoing call:
a Dial a group access code: 9.81 - 87.
b. CO Dial tone is returned.
c. Dial the desired telephone number.
NOTE: LCR amnot be accessedfrom DISA. If
LCR is enabled DISA users may dial 81 to
aa2essliJ7es~tnlnkgrcJup1.
NOTE: 7he conference timer (Refer to Sec.
710.7)
will monitor a DISA -bunk-tu-bunk"
allLaNireleuseiilelinesone(l)rrrfnute~r
the time expires.
To reach an internal station:
a Dial the Sdfgit station number. Ring-
back tone will be heard.
b. Converse when party answers.
NUlEIfthestationdial.edisuna&nded
busyortnDND,fnfercomd.MtonewiLl&
returned b&r the Preset call Fonxrd Timer
expires) Refer to Sec. 710.4
400.26 DIRECTORY DlALWG
To dial using directory dialing
To view the directory list:
a Dial the directory list dial code I2901 or
press the pre-programmed Flex button
programmed as a directory dialing but-
ton.
b. Press a button on the key pad, once,
twice or three times, to represent the
letter of the alphabet, to begin viewing
the list of names. The letters of the
aiDhabet are represented on the key pad
C.
I
as follows:
A =2
B
= 22
C =222
D
=3
E
=33
F
= 333
G =4
H =44
I
=444
J =5
K
=55
L =555
M
=6
z
=66
=666
P
=7
9
=7
R =77
S = 777
_
T
=8
U
=88
V
=888
W
=9
X = 99
Y = 999
z = 999
Next =*
Prev =#
Yaxnes beginning with the letter chosen
will appear on the LCD display.
IftherearenommestntheDi.rectoyList
begimingwiththedesiredMter,anamewith
thenexthfgherletkrwiLlbesbwnontheL.CD
dfsPlay*
Issue 1,
January 1992
400-g